Solscud007 Posted May 15, 2012 Posted May 15, 2012 So I picked up a Stormtrooper LED keychain two weeks ago and finally got un-lazy to take some pics of it. Just like the Darth Vader LED keychain and minifig keychains, I immediately removed the keychain. good news, the Stormtrooper helmet is NOT glued to the head. The metal post of the keychain is installed inside the head. The head is snapped on to a short bulging column. So the head can pop off and on. I just used a pair of pliers and broke the metal post off at the top of the head. I like the crotch printing. They tried to mimic the minifig crotch with a skinny black line. the button is flush to the torso just like Darthvader. I plan to modify this into a Sandtrooper. Make a custom pauldron and glue a 2x2 plate on the back battery cover so I can LEGO a backpack on. New pics in comparison with other figs. L-R: Clock, LED keychain, Minifig You can swap helmets and make a funny looking Super Deformed Stormtrooper. If you remove the Keychain fig head you can place the Minifig helmet on. Parts are interchangeable with Darth Vader. Like arms, head and cape. Quote
Mr Man Posted May 15, 2012 Posted May 15, 2012 I like the crotch printing. Now There's a comment that needs context . Good review, can you mix with the Darth Vader one? Quote
Solscud007 Posted May 15, 2012 Author Posted May 15, 2012 Now There's a comment that needs context . Good review, can you mix with the Darth Vader one? Sure. They are from the same mold. I will take pics later when i get my Vader and Trooper together. This was taken at work. Quote
Mr Man Posted May 15, 2012 Posted May 15, 2012 Sure. They are from the same mold. I will take pics later when i get my Vader and Trooper together. This was taken at work. Thank you. Quote
1980-Something-Space-Guy Posted May 16, 2012 Posted May 16, 2012 Thanks for the review!!! MUST HAVE!!!! By the way, since I don't live in the US, where do they sell these? I always have to get them through resellers. I'll have to get myself one of these... My Darth Vader is in need of minions to command! Quote
Fuppylodders Posted May 16, 2012 Posted May 16, 2012 Your Darth Vader has a lightsaber!!! Mine doesn't =O How did you get the key chain part out of the head? I don't want to break mine, although I have had the heads off... Also, how did you get the Darth Vader head out of his helmet? Quote
1980-Something-Space-Guy Posted May 16, 2012 Posted May 16, 2012 Your Darth Vader has a lightsaber!!! Mine doesn't =O That's right! Now I'm jealous. Quote
Solscud007 Posted May 16, 2012 Author Posted May 16, 2012 Your Darth Vader has a lightsaber!!! Mine doesn't =O How did you get the key chain part out of the head? I don't want to break mine, although I have had the heads off... Also, how did you get the Darth Vader head out of his helmet? The light saber came from a Hallmark LEGO Darth Vader xmas ornament. It was glued into the Ornament's hand. The handle is a tad bit too narrow so I used some tape and wrapped it around the handle to make it fit into the LED Keychain hand. Darth Vader's head is glued to the helmet. Unfortunately there is nothing you can do about it. Without ruining the face or helmet. I just use a pair of pliers to remove the keychain. There is a split ring that holds the chain to the eye screw in the head. Split that open and remove the chain. Then I have access to the eye screw. I grab as close to the helmet and snap the metal off. for the trooper, remove the helmet after you break the metal post and then there will be more ontop of the head. Break it off again. Quote
Mr Man Posted May 17, 2012 Posted May 17, 2012 Wow thanks a lot for those pics, I really must get them now. Quote
Solscud007 Posted May 17, 2012 Author Posted May 17, 2012 (edited) Thanks for the review!!! MUST HAVE!!!! By the way, since I don't live in the US, where do they sell these? I always have to get them through resellers. I'll have to get myself one of these... My Darth Vader is in need of minions to command! I got mine from REI outdoor sports store. They sell them on their website. Maybe they ship to costa rica? Edited May 17, 2012 by Solscud007 Quote
Masked Builder Posted May 17, 2012 Posted May 17, 2012 Pretty nice little figure. I've seen the Darth Vader one around quite a lot. I may pick this one up if I find it. Quote
1980-Something-Space-Guy Posted May 17, 2012 Posted May 17, 2012 (edited) Is the pricing good? Edited April 26, 2016 by BrickHat Quote
Solscud007 Posted May 17, 2012 Author Posted May 17, 2012 Don't know, but I'll be visiting the States soon anyways, so I'll probably just look for one of those stores. Thanks. Is the pricing good? Yep $11 USD. Quote
1980-Something-Space-Guy Posted May 17, 2012 Posted May 17, 2012 Yep $11 USD. Great to know that, thanks! Now I'm going to complete my LED keychain collection. Hope they release more of these. They look great. Maybe that's because I'm a minifig addict. Anyways, thanks a lot for the info and the review. Quote
deco_droid Posted May 25, 2012 Posted May 25, 2012 Great to know that, thanks! Now I'm going to complete my LED keychain collection. Hope they release more of these. They look great. Maybe that's because I'm a minifig addict. Anyways, thanks a lot for the info and the review. I absolutely love that they're making more of these. I got the Vader awhile back so the trooper is another must-buy for me. I have never gotten into the magnets, but I could see myself collecting these. The larger scale as well as the nice glossy plastic makes them very attractive for display. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.