msk6003 Posted May 26, 2021 Posted May 26, 2021 (edited) Even this model's looks is little different with real car but I like it's lot of function. And it will be great in technic too! Planed function Bulitproof shield up/down with one of exhaust pipe Hidden machine gun revel with gear stick Secret sawblade which extend from rear wheel with one of exhaust pipe Ejction seat Straight 6 engine with differential with RWD Steering front wheel Most complecated function is secret sawblade in rear wheel. It need to extend to outside when wheel is still spinning. I decided to make a new wheel because it was impossible to make an axis that can rotate and slide while maintaining a size 49.5 with the existing Lego wheel. Original lego wheel VS my custom wheel with 49.5 tire I use mini turntable part. It has 28t gear on it's side for rotating wheel while sliding axle using center hole. Use two turntable part per wheel. But outside of wheel is only use upper part of turntable while inside part of wheel use complete assembly. Edited May 26, 2021 by msk6003 Quote
BrickBuildingFox Posted May 26, 2021 Posted May 26, 2021 Wow, I like the idea to add the sawblade mechanism... to be honest, in the beginning, I couldn't believe that the wheel works properly... so I had to build it by myself and I am very impressed by the result. Quote
2GodBDGlory Posted May 26, 2021 Posted May 26, 2021 Looks interesting! The small scale could be a real challenge, though, but I look forward to seeing what you'll come up with! Quote
syclone Posted May 26, 2021 Posted May 26, 2021 (edited) Oh, that's a lot of functions, great model choice! Looking forward to those sawblades in action! Edited May 26, 2021 by syclone lack of attention Quote
msk6003 Posted May 29, 2021 Author Posted May 29, 2021 (edited) Current progress I add trigger on rear bumper like original model and add 2 exhaust pipe for active function. Whole model will be half~one stud bigger than original. Nearly 1:1 scale. Edited May 29, 2021 by msk6003 Quote
SNIPE Posted May 29, 2021 Posted May 29, 2021 (edited) now THIS is cool. Edited May 29, 2021 by SNIPE Quote
MangaNOID Posted May 29, 2021 Posted May 29, 2021 Nice work on those functions! ‘Spikes’ through the wheels is genius Quote
msk6003 Posted June 2, 2021 Author Posted June 2, 2021 Well, I think I picked a model that's too tight. Quote
2GodBDGlory Posted June 3, 2021 Posted June 3, 2021 Are you thinking it is too small to model? I may be misunderstanding you, but I'd love to see this model completed, even if the interior had to be sacrificed. I think this is easily my favorite of the System sets being entered in the contest thanks to the unusual functions and 1:1 scale! Quote
msk6003 Posted June 3, 2021 Author Posted June 3, 2021 (edited) 7 hours ago, 2GodBDGlory said: Are you thinking it is too small to model? I may be misunderstanding you, but I'd love to see this model completed, even if the interior had to be sacrificed. I think this is easily my favorite of the System sets being entered in the contest thanks to the unusual functions and 1:1 scale! No. I mean this model is tighter than I think. According to original model, I need to put both chair on differential and gear stick for machine gun need to locate on stop point of 4L axle with middle stop which connected to 20t gear and universal joint. Maybe I will remove differential and replace to just double 12t gear for get some space. I need to reworking fender (those small fender's top is 1 stud lower than original model.) and I'm thinking about to add front machine gun and front bumper now. Edited June 3, 2021 by msk6003 Quote
msk6003 Posted June 5, 2021 Author Posted June 5, 2021 Progress 3 Finish Ejction seat and stright 6 engine, and steering. Differintial is removed for get some space for ejction seat and engine only work with right rear wheel. Now I need to thinking to make front machine gun. I think use original model's grill and gun set. Quote
2GodBDGlory Posted June 5, 2021 Posted June 5, 2021 Nice! I hope you're planning on getting rid of the magenta, though! Quote
msk6003 Posted June 5, 2021 Author Posted June 5, 2021 (edited) 7 minutes ago, 2GodBDGlory said: Nice! I hope you're planning on getting rid of the magenta, though! I use it because I don't have enough color. I will order DBG biscuit and lot of metallic silver. Edited June 5, 2021 by msk6003 Quote
2GodBDGlory Posted June 5, 2021 Posted June 5, 2021 1 minute ago, msk6003 said: I use it because I don't have enough color. I will order DBG biscuit and lot of metallic silver. Yeah, that's about what I expected. I've got some temporary colors in my entry at this point too. Keep up the good work! Quote
msk6003 Posted June 8, 2021 Author Posted June 8, 2021 (edited) CAD progress 2 Need to thinking to place front machine gun function. I have only 2x5 space. And those fender's height is ambiguous. If I put one stud lower, it cover wheel well but don't match with original model's side height. If I put fender like image, it can match with original model's side height but has to big gap between wheel. And if I use 3x11 curved panel insted fender part, it touch wheels and make wheel doesn't rolling well. About front bumper, maybe I will rip off entire steering system and replace to virtual pivot steering. But I don't think it's possible. Edited June 9, 2021 by msk6003 Quote
msk6003 Posted June 27, 2021 Author Posted June 27, 2021 Progress 4 I finish all function. Now need to make bodywork and need to think modifited front machine gun.(If I put original model's gun, it touch front wheel.) Quote
Rebel_Lego Posted June 27, 2021 Posted June 27, 2021 Great model! I’ve watched that shooting mechanism over and over and still don’t fully understand how it works... Quote
msk6003 Posted June 27, 2021 Author Posted June 27, 2021 19 minutes ago, Rebel_Lego said: Great model! I’ve watched that shooting mechanism over and over and still don’t fully understand how it works... Those shooting mechanism and front machine gun mechanism make my brain hurt... I spent nealy 20 days for that. Quote
Rebel_Lego Posted June 27, 2021 Posted June 27, 2021 20 minutes ago, msk6003 said: Those shooting mechanism and front machine gun mechanism make my brain hurt... I spent nealy 20 days for that. I can imagine... Quote
msk6003 Posted June 28, 2021 Author Posted June 28, 2021 13 hours ago, SNIPE said: fantastic, I think this will win As planned... Quote
msk6003 Posted July 3, 2021 Author Posted July 3, 2021 CAD progress 3 This thing keep trying to blow up my brain. Anyone has idea for fender? Quote
Rebel_Lego Posted July 3, 2021 Posted July 3, 2021 The part that the original model uses at the front of the bonnet, the 2x2 slope (the one you use too) is maybe a better alternative if you put it on the 1x6 technic brick, because if I’m honest, this version is ugly. Quote
amorti Posted July 3, 2021 Posted July 3, 2021 I couldn't do better, but I must say this isn't a technic body. This is stacked liftarms and system slopes poorly replicating a brick built body. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.